TBR XV4 Rear Bumper -- HPI Jumpshot MT - 26005
Introducing our newest product line: The 2015 XV4 series rear bumpers.
With this new design we are looking to capture a more scale look while still achieving the durability that our customers have come to expect from our bumpers.
The new XV4 bumpers have been changed so that the Rods are attached via M4 screws from the inside of the bumper. We have eliminated the M3 screws and lock nuts.
In addition to the new style we have an optional single-wheel wheelie bar attachment available.
- One TBR RBS Rear Bumper Skid - MPN A072
- One TBR XV4R Bolt-On-Rear bumper - MPN G096
- Two TBR C.1 Rods - MPN Y132
- Weight - 1.3oz / 39 Grams
Note:- All T-Bone products are manufactured after order has been placed.
Mount the Y082 C.1 Rods to the G096 XV4 bor (bolt on rear) bumper with four M4x12 flat head socket screws. Pass the M4 screws through the inside four upper holes in the bolt on bumper and thread them into the rods. Note: Rods mount on outside of bumper.
Mount the Y082 bor to our A072 RBS ( rear bumper skid) with three M3x10mm flat head socket screws and three M3 lock nuts. Tighten. Note: the bor front bumper mounts under the RBS.
Last step is to remove four stock bulkhead screws and attach your completed XVR v2 bumper. Use the supplied screws: two-M3x22mm flat head sockets (toward front of car) and two M3-10mm flat head sockets (toward the rear of the car).
- Tighten all screws.
Product color examples: