Skip to content

TBR Basher Front Bumper, Servo Guard Clear Poly set - Traxxas Stampede 4x4 - 87104

Sold out
$35.99
SKU 871041
Color
Availability: translation missing: en.general.icons.icon_check_circle icon Out of stock
The front bumper mounts under the chassis through a nylon brace. The servo guard is Clear Polycarbonate and is raised off of chassis in order to clear the servo. The necessary mounting hardware is included.
This listing comes with the following for Traxxas Stampede 4x4 and Stampede 4x4 VXL:
  • One TBR Basher front bumper
  • One nylon front brace
  • One TBR servo guard Clear Poly

Product color examples:

BlackRedBlue

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Peter Bachaalani
Wanted a tactical looking bumper for a stampede made to look like an unmarked police chevy 2500 HD

Bought this for a stampede as mentioned above. Bumper and brace are pretty well made and strong. The plexi glass peice for the servo gaurd was a bonus since I just needed a Bumper initially. I installed all the pieces, there are no instructions and the screws it comes with vary in length depending on if you plan to install the plexi servo gaurd or not. Once I removed the plexi cover to apply thread locker into the threaded sleeve extention piece that fits under the inner front subframe mount via a longer than stock screw I let it set for a few minutes and when I came back the plexi arount the screw holes had shattered. It also formed a long Crack down the angled groove. It may have been a tad to snug but I thought adding thread locker would prevent the screws from backing out and the gaurd catching the ground. Some instructions would of been helpful with a reminder to not snug the screws any on the gaurd just enough to enter the beveled seat. I still ran it with the gaurd and it catches alot of debris between the under chassis and the gaurd. Snow, dirt, grass etc. Pretty hard do get out and having a st racing front steering setup I don't link all that sitting and grinding into the steering. When doing wheelies and the front drops back down it bangs on the ground at the servo gaurd. Also when braking full brake it slams onto the gaurd. Stampede setup is 4x4 with castle 3800 kv motor, 14t pinion, castle copperhead esc, belted tires, 54t centre differential with 1 million weight oil and 3.90 gear ratio from non vxl stampede. Truck with climb slowly right over any city curb or class 1 rail line. Also wheelie and take off to 60Km/h. Bumper impedes its ability to go up to infrastructure and have its wheels touch to climb up and over. You can still angle climb but it does bounce back a few times.