TBR Wheelie Bar - Arrma Vorteks 4x4 3S - 00049
Protect your VORTEKS 4x4 3S with TBR's Wheelie Bar!
We've designed this wheelie bar around one of our classic bumper designs so you get the benefits of maximum protection and can pull off amazing wheelies!
It replaces the stock bumper and mounts up to the existing brace.
The TBR wheelie bar can be removed and you can use the bumper by itself.
This listing comes with the following:
One TBR Wheelie Bar
- One TBR RBS (Rear Bumper Skid)
One TBR Hinge Pin Cover
Product color examples:
Remove Stock Bumper, Brace and Front Suspension Mount Screws.
Remove Front Suspension Mount Plate and flip so that the Counter Sunk Holes are facing in.
Install new Hinge Pin Cover Plate with two M3x14 Button Head Screws (Supplied).
Assemble Wheelie Bar to Bumper with two M4x10 Flat Head Socket Screws (Supplied).
Next, attach the two Stock Button Head Screws through stock brace mounting holes that attach to
Now attach stock brace to bumper with two M3x30 Button Heads, two M3x6x20mm Spacers,
and two M3 Locknuts.
Next attach assembled unit to shocktower first (do not tighten), then threaded a M3x12 Flat Head Socket Screw with
a M3x6x2mm spacer to bottom of chassis (again, do not tighten), now the stock M4x40 Flat Head.
Tightening sequence. Bottom M4 > M3> Brace to shock tower
Hi there. Will this work ok on the granite 3s blx?
Yes is will! though we do suggest buying the actual bumper set that we designed specifically for the Granite 3s!
What is the part number for the center skid for an arrma granite blx 3s? I cannot find it on the site.
We do not offer a chassis skid for the granite 3s yet.
Granite 4x4 3s, Big Rock 4x4 3s